Isuzu Parts Guide
Isuzu Lower Water Outlet Housing 8-97916700-0: Fitment and Inspection Guide
Review the listed Isuzu D-Max, TFR, 4JA1, 2.5 and 2.8 references for lower water outlet housing 8-97916700-0, plus practical fitment and receiving checks.
The product listing identifies this item as a genuine Isuzu lower water outlet housing, also described as a lower thermostat housing, for applications that match OEM part number 8-97916700-0 . It is commonly referenced in the listing for Isuzu D-Max 4JA1 and D-Max 2.5 Direct applications, as well as TFR 2.5 and 2.8 vehicles from 1997-2002. These references are a starting point rather than a substitute for a vehicle-specific parts check. What the product record states Product type: lower water outlet housing / lower thermostat housing. OEM part number: 8-97916700-0. Compact number reference: 8979167000. Listed vehicle references: Isuzu D-Max and Isuzu TFR. Listed engine reference: 4JA1. Listed displacement references: 2.5 and 2.8. Listed model-year reference: 1997-2002. The product description also says the supplied photo shows the housing assembly with a metal pipe and a gasket or label associated with part number 8-97916700-0. Buyers should use the current product page and the item received as the visual references. Confirm fitment before ordering Model names, engine families, and year ranges can include regional or production differences. Before ordering, match the OEM number against the vehicle VIN, engine code, and a trusted vehicle-specific parts reference. If the removed housing is available, compare its mounting pattern, pipe orientation, connection points, and part-number markings with the listed product image. Record the full VIN and engine code. Confirm that 8-97916700-0 is specified for the vehicle. Compare the original housing shape and pipe direction with the product photo. Check whether the required gasket and any other installation items are present or must be sourced separately. Resolve any mismatch before shipment or installation. Receiving inspection After delivery, verify the part before removing or discarding its packaging. Confirm the part-number reference where shown and compare the received housing with the current listing image. Inspect the casting, mounting faces, pipe, and connection areas for visible shipping damage. The listing does not provide dimensions, torque values, sealant instructions, or a complete contents list beyond what is shown, so those details should not be assumed. Installation planning Cooling-system work should follow the correct workshop procedure for the specific vehicle. Use the specified gasket or sealing method, fastener sequence, and tightening values from an appropriate service reference. After installation, refill and bleed the cooling system according to that procedure and check the repaired area for leaks. This article does not diagnose a cooling fault or promise that replacing the housing will correct overheating or coolant loss from another cause. Buyer takeaway Use OEM number 8-97916700-0 as the primary product reference, then confirm the VIN, engine code, vehicle specification, and physical configuration before ordering. Keeping those checks together is especially important when the part is being prepared for export and cannot be compared with the vehicle before shipment.